Retro Access exclusive custom-designed Housing (Hood) and Printed Circuit Board (PCB) for DIY cables. Unlike conventional designs which place components downstream at the SCART end, Retro Access boards place key signal components right at the source (console). This ensures superior signal integrity for the clearest, most accurate audio-visual experience. This kit includes all necessary circuit components pre-mounted for safe and specification compliant RGB video while aiding in clean, simplified assembly versus struggling with loose components.
Mini-DIN 10 is found on Sega Saturn and compatible mods.
Cable selection is for the strain relief hole size only, cable is not included. The approximate diameter of Fortraflex is 7mm (0.27″), Coaxial is 9mm (0.35″).
Installation:
- Solder the board directly to the Mini-DIN 10 pins.
- Solder Red, Green, Blue conductors to R, G, B pads.
- Solder Left Audio, Right Audio conductors to S, L, R pads.
- For CSync (NTSC only) applications, solder sync to “S” pad. For Luma (All Regions) solder directly to the Luma “Y” pin.
- Solder 5V directly to the 5V pin.
- Solder grounds to square ground pads.
- Use glue for jacket strain relief and assemble the housing.
Please contact a modding professional if you are not comfortable building DIY cables.
Features:
- Integrated sync buffer provides a universally compatible problem-free CSync signal.
- CSync attenuating 470 Ω resistor provides safe voltage for 75 Ω CSync.
All product names, logos, and trademarks, registered or unregistered, are the property of their respective owners. They are referenced on this site solely to identify compatibility. Their use does not imply any affiliation with or endorsement by those companies.
