SCART cable for RGB enabled PC Engine Duo/Turbo Duo/Core Grafx

Retro Access

$36.99 
SKU: 5ZMASFLXZDESTZFF05
Made to order item. Dispatch time varies based on selected option

This cable is for RGB enabled PC Engine and Turbo Duo systems. Your system must have the RGB upgrade to work with this cable, and an 8 pin output port installed. It uses the most common pinout used for RGB systems. Please make sure you have this pinout as some people are using a backwards version. In the regular cable, the pinout goes (looking at console): red, green blue on the top three pins (green being the centre pin.) In the standard din 8 pinout, 7=red, 8=green, 6=blue. Red is right above the csync/composite video pin. If your pinout for your console does not match this configuration, please leave a "message to seller" when checking out! All cables can be customized. No problem at all to reverse red and blue as is required by some din 8 RGB outputs.

There are two cable options in the “cable length/type” menu:


Fortraflex is a highly graded individually shielded, highly flexible cable made to order by Tasker of Italy for our company. All signal lines are individually shielded with pure copper strand wrap to eliminate crosstalk-induced artifacts. The outer casing is a soft and flexible polymer used commonly in professional microphone cables or high end wired game controllers (eg: official SNES controllers) to allow for increased mobility.

75 ohm multicore coax cable is a professional grade cable that maintains an impedance of 75 ohms to completely prevent signal reflection. This is the highest possible grade of cable possible for video signals, and we’re the only company in the world offering this as an option for SCART. Each line is individually shielded with copper wrap as well as having the grounds isolated from other signals via color coded PVC coating. This cable is also made to order for us by Tasker of Italy. Coaxial cable is thick, but it's the best option if you need a longer cable. 

Please note that in doujindance’s recent ebay listings that he’s got the pinout listed backwards with an incorrect numbering system, this has caused people to order the wrong pinout so please note that the “7=red, 8=green, 6=blue” setup we are using *is* compatible with his mods and there is no need to ask for a change to pinout if you are using consoles from this particular seller.