Retro Access exclusive custom-designed Housing (Hood) and Printed Circuit Board (PCB) for DIY cables. Unlike conventional designs which place components downstream at the SCART end, Retro Access boards place key signal components right at the source (console). This ensures superior signal integrity for the clearest, most accurate audio-visual experience. This kit includes all necessary circuit components pre-mounted for safe and specification compliant RGB video while aiding in clean, simplified assembly versus struggling with loose components.
Compatible with the Sega Dreamcast.
Cable selection is for the strain relief hole size only, cable is not included. The approximate diameter of Fortraflex is 7mm (0.27″), Coaxial is 9mm (0.35″).
Compatible with both Interlaced (480i, 15 kHz) and Progressive Scan (480p, 31 kHz).
Installation:
- Install the connector over the main PCB, verify orientation and solder in place.
- Solder Red, Green, Blue conductors to R, G, B pads.
- Solder Sync, Left Audio, Right Audio conductors to S, LA, RA pads.
- Solder 5V directly to the 5V pin.
- Solder grounds to square ground pads.
- Use glue for jacket strain relief and assemble the housing.
Please contact a modding professional if you are not comfortable building DIY cables.
Features:
- Selector switch to toggle Interlaced (480i, 15 kHz) or Progressive Scan (480p, 31 kHz).
- Integral H+V sync combiner circuit designed by citrus3000psi.
- Genuine Kemet premium 220 µF Tantalum AC coupling capacitors within the console connector provide clean, precise RGBS signals at the source, preventing unwanted DC bias along the cable, preserving accurate color, contrast and brightness.
All product names, logos, and trademarks, registered or unregistered, are the property of their respective owners. They are referenced on this site solely to identify compatibility. Their use does not imply any affiliation with or endorsement by those companies.
