Retro Access NES/Atari 2600 8 pin din stereo RGB SCART lead for RGB mods

Retro Access


Coax versions of this cable feature a small 3.5mm audio pigtail connected at the din end. Non coax versions have an isolated audio line connected at the SCART end. If your mod has audio connected in the din socket, please go here for this basic 8 pin din to SCART:

8 pin mini din to SCART


This cable is provided for NES consoles upgraded to RGB using viletim's NES RGB board, or anything else with the same pinout such as the Atari 2600 board or Game Gear RGB mods. For clarification, it uses a pinout identical to the XRGB Mini 8 pin socket which is how the NES RGB is wired.

Contains no components, in keeping with such mods. If you are installing the mod yourself, please use the 75 ohm sync mode.

As you may know, the NES RGB is prone to sound output interference (this is more common with 8 bit consoles due to large areas of the screen being filled with bright, solid colors) so this has isolated audio via a 3.5mm plug. To keep things neat and tidy, all coax versions have the audio connected at the DIN end, which works fine through a coax cable.
 WILL NOT WORK on a NES that has not been upgraded to RGB via the specific board with the 8 pin mini din socket.