Genesis 1 BNC and audio cable - Pro Coaxial Multicore for PVM monitor and Extron

This cable is attenuated to 75 ohm sync.

Up for sale is a BNC and RCA cable for Genesis/Megadrive 1. Red, green, blue and csync lines are BNC. Audio lines are RCA. 5 feet long as standard. Hookups are 10 inch long, if you need them longer for an Extron Crosspoint just let me know, this can be done at no extra cost. Please, when checking out mention what monitor or switch box you are using as the Extron Crosspoint requires particularly long hookups which get messy and tangled on other setups so we default to shorter lengths as it is possible for the end user to strip the outer casing themselves in order to free up the individual lines if they add an extron Crosspoint to their setup at a later date.

220uf capacitors are in each bnc plug, as required by the Genesis output. 75 ohm resistors for RGB and 470 ohm resistor for the csync line are in the din plug.

Tested via direct hookups to a PVM monitor as well as via an Extron switch box (4 switch version, with audio) via Auto and manual switching. Output device was an XRGB mini via BNC/phoenix connector to 8 pin mini din custom cable.